Publikationen: Auflistung Publikationen nach Erscheinungsdatum
Anzeige der Dokumente 1-4 von 4
-
Physiochemical and mechanical characterisation of orthodontic 3D printed aligner material made of shape memory polymers (4D aligner material)
(2023-12-25)<em>Objectives:</em> To conduct a physiochemical and mechanical material analysis on 3D printed shape-memory aligners in comparison to thermoformed aligners.<br /> <em>Materials and methods:</em> Four materials were examined, ... -
Force system of 3D-printed orthodontic aligners made of shape memory polymers: An in vitro study
(2024-06-10)This study aimed to report forces and moments delivered by 3D-printed aligners. Tera Harz TC-85 resin and Zendura FLX (ZF) thermoformed sheets (0.76 mm) were used. Rectangular strip specimens (50 × 10 × 0.6 mm) were produced ... -
Effect of the Height of a 3D-Printed Model on the Force Transmission and Thickness of Thermoformed Orthodontic Aligners
(2024-06-20)This research aims to investigate the influence of model height employed in the deep drawing of orthodontic aligner sheets on force transmission and aligner thickness. Forty aligner sheets (Zendura FLX) were thermoformed ... -
Comparative Analysis of Shear Bond Strength in Orthodontic Brackets Between Milled and 3D-Printed Definitive CAD/CAM Restorations
(2024-10-18)<strong>Objective:</strong> The objective of this study was to evaluate the effect of different surface treatment methods on the shear bond strength (SBS) of metal brackets bonded to two types of CAD/CAM composite restorations: ...
