Faculties of University Bonn: Search
Now showing items 1-10 of 21
Estimation of Focal Length Variations of a 100-m Radio Telescope's Main Reflector by Laser Scanner Measurements
(2012-08)
Due to gravitation, the main reflector of a radio telescope underlies a deformation which causes
a change in focal length depending on the variations of the elevation angle of the telescope. In order
to estimate these ...
Modeling the Beam Deflection of a Gantry Crane under Load
(2014-02)
Gantry cranes load and unload containers from container ships. To ensure safety and operation, the deflection of their main beams under load should be analyzed. This deflection depends on the weight of the loaded container ...
Dealing with systematic laser scanner errors due to misalignment at area-based deformation analyses
(2018-03-07)
The ability to acquire rapid, dense and high quality 3D data has made terrestrial laser scanners (TLS) a desirable instrument for tasks demanding a high geometrical accuracy, such as geodetic deformation analyses. However, ...
Accurate georeferencing of TLS point clouds with short GNSS observation durations even under challenging measurement conditions
(2018-08-29)
The accuracy of georeferenced TLS point clouds
is directly influenced by site-dependent GNSS effects, deteriorating
the accuracy of the ground control point coordinate
estimation. Especially under challenging GNSS ...
Empirical stochastic model of detected target centroids: Influence on registration and calibration of terrestrial laser scanners
(2019-03-22)
The target-based point cloud registration and calibration of terrestrial laser scanners (TLSs) are mathematically modeled and solved by the least-squares adjustment. However, usual stochastic models are simplified to a ...
Analyse der Konfiguration bei der Approximation ungleichmäßig abgetasteter Oberflächen auf Basis von Nivellements und terrestrischen Laserscans
(2015)
Seit einigen Jahren unterliegt der Bereich der Ingenieurgeodäsie einem starken Wandel, da sich diese Disziplin generell den stetig weiterentwickelnden, anwendungsbezogenen Problemstellungen widmet. Unter diesen Aspekten ...
Analyse der Konfiguration bei der Approximation ungleichmäßig abgetasteter Oberflächen auf Basis von Nivellements und terrestrischen Laserscans
(2015-07-30)
Seit einigen Jahren unterliegt der Bereich der Ingenieurgeodäsie einem starken Wandel, da sich diese Disziplin generell den stetig weiterentwickelnden, anwendungsbezogenen Problemstellungen widmet. Unter diesen Aspekten ...
Aiming at self-calibration of terrestrial laser scanners using only one single object and one single scan
(2014-12-05)
When using terrestrial laser scanners for high quality analyses, calibrating the laser scanner is crucial due to unavoidable misconstruction of the instrument leading to systematic errors. Consequently, the development of ...
Biased and unbiased estimates based on laser scans of surfaces with unknown deformations
(2014-10-02)
The estimates based on laser scans of surfaces with unknown deformations are biased and not reproducible when changing the scanning geometry. While the existence of a bias is only disadvantageous at some applications, ...
Flächenhafte Deformationsanalysen mit terrestrischen und Nahbereichslaserscannern: eine Gegenüberstellung anhand von Beispielen
(2014)
Dieser Beitrag stellt einen Überblick über den Ablauf einer flächenhaften Deformationsanalyse basierend auf terrestrischen Laserscannern (TLS) dar, wobei speziell auf die Datenerfassung, Vorverarbeitung und Auswertung ...